China DIN582 Carbon Steel Lifting Eye Nut Manufacturer, Supplier, Factory

ASTM F436m Hardened HDG Flat Washer is stamped piece from, The shape is round with a hole in the middle. ASTM F436m Hardened HDG Flat Washer have a smooth bearing surface which is used under the head of a bolt, ASTM F436m Hardened HDG Flat Washer are used to reduce friction, The force is unoform, It is not easy to slip and lock in the process of rotation, and it is anti loose design, prevent leakage, isolate, prevent loosening, or distribute pressure.

DIN970 Metric Hexagon Nut play the role of a component of all manufacturing machinery.DIN970 Metric Hexagon Nut can fastener other components. DIN970 Metric Hexagon Nut have kinds of nut. We have common national standard, German standard, the British standard, American Standard, the subject of the nut. There are many kinds of DIN970 Metric Hexagon Nut. DIN970 Metric Hexagon Nut is very common.

En14399-4 Grade10 Black Hex Nut with Hv also called structural nuts, are both thicker and wider than a standard (finished) hex nut and compatible with high strength and large diameter bolts. En14399-4 Grade10 Black Hex Nut with Hv in sizes smaller than 7/16" are double chamfered. En14399-4 Grade10 Black Hex Nut with Hv larger than 7/16" are either double chamfered or chamfered on top with a washer faced bearing surface.

ASME Black Half Thread Hex Bolt Class 8.8 steel screws are suitable for fastening most machinery and equipment. To maintain corrosion resistance, use ASME Black Half Thread Hex Bolt with black ultra-corrosion-resistant-coated nuts and washers.

ASTM A194-2h Heavy Hex Nuts are the most commonly used nuts in the fastener industry. ASTM A194-2h Heavy Hex Nuts are relatively strong and durable fasteners that can withstand some special industrial conditions. ASTM A194-2h Heavy Hex Nuts hardness, thickness and tensile strength enable it to withstand some extreme industrial environments.

GB10433 Welding Shear Stud refer to the installation of steel pins or grommets, that extend out of the top flange of a steel support beam. Normally the GB10433 Welding Shear Stud are welded, with a spot welder, after the metal deck is installed over the supporting structural steel. The spot welder will burn through the metal deck and attach the GB10433 Welding Shear Stud directly to the top of the steel beam.