China 2h Hex Nut Manufacturer, Supplier, Factory

ASTM A194-2HM Heavy Hex Nuts are the most commonly used nuts in the fastener industry.ASTM A194-2HM Heavy Hex Nuts are relatively strong and durable fasteners that can withstand some special industrial conditions. ASTM A194-2HM Heavy Hex Nuts hardness, thickness and tensile strength enable it to withstand some extreme industrial environments.

GB10433 Welding Shear Stud refer to the installation of steel pins or grommets, that extend out of the top flange of a steel support beam. Normally the GB10433 Welding Shear Stud are welded, with a spot welder, after the metal deck is installed over the supporting structural steel. The spot welder will burn through the metal deck and attach the GB10433 Welding Shear Stud directly to the top of the steel beam.

SABS 1282 Black Heavy Hex Bolts are specifically designed for use with heavy hex nuts in the connection of structural members (as opposed to tapped holes). SABS 1282 Black Heavy Hex Bolts are strong heavy-duty bolts that are typically used for creating structures through steel to steel structural connections such as buildings and bridges. A grade 8 bolt would be one that meets ASTM A490 standards. The high quality steel used to create SABS 1282 Black Heavy Hex Bolts are designed for strength and durability, allowing SABS 1282 Black Heavy Hex Bolts to conform to ASTM A325. SABS 1282 Black Heavy Hex Bolts are often applied alongside structural nuts and washers to metal beams and girders.

Shear Stud Welding Nelson Stud are used in stud welding to secure steel framed buildings to create a shear connection between the steel and the concrete. We supply and fix all available sizes of Shear Stud Welding Nelson Stud for through deck and straight to steel welding. Shear Stud Welding Nelson Stud are designed to tie the concrete to the steel beams and to resist shear loadings between the concrete slab and steel beam in composite construction.

ISO13918 - Aws - D1.1/D1.1m - Welding Nail are designed to tie the concrete slab with the steel beams and steel deck. This weld studs shear connectors can resist shear forces and increase shear loading capacity in steel buildings. ISO13918 - Aws - D1.1/D1.1m - Welding Nail Mainly applied for through steel deck stud welding in composite construction project. All Shear Studs are supplied with ceramic ferrules (ceramic ring). The Ceramic ferrules are made of cordierite and able to withstand heat shock as well as high temperatures without melting or breaking

DIN436 Flat Washers Square Washer fit into slots and channels and have flat sides to keep them from rotating. DIN436 Flat Washers Square Washer are wider and thicker than most round washers, making them good for distributing heavy loads. Zinc-plated DIN436 Flat Washers Square Washer are corrosion resistant in wet environments.