China 14399-4 Manufacturer, Supplier, Factory

As for aggressive selling prices, we believe that you will be searching far and wide for anything that can beat us. We are able to state with absolute certainty that for such good quality at such costs we've been the lowest around for 14399-4,En14399-4,Hex bolt with Hv,bolt hv,hv bolt, You would not have any communication problem with us. We sincerely welcome prospects all around the globe to call us for business enterprise cooperation.
14399-4, Make sure you feel cost-free to send us your specifications and we'll respond to you asap. We have got a professional engineering team to serve for the every single thorough needs. Free samples may be sent to suit your needs personally to know far more facts. So that you can meet your desires, be sure to genuinely feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.

Hot Products

  • DIN557 Carbon Steel Square Nuts

    DIN557 Carbon Steel Square Nuts

    DIN557 Carbon Steel Square Nuts are Made with top-quality materials, these nuts are known for their durability, strength, and corrosion resistance. DIN557 Carbon Steel Square Nuts are designed to last. The high-quality steel construction provides excellent tensile strength, meaning they can handle high load capacities without deforming or breaking. Galvanized Carbon steel is also resistant to corrosion, so DIN557 Carbon Steel Square Nuts stand up well even in wet and humid environments.
  • DIN6915 10 Hv Heavy Hex Nuts

    DIN6915 10 Hv Heavy Hex Nuts

    DIN6915 10 Hv Heavy Hex Nuts also called structural nuts, are both thicker and wider than a standard (finished) hex nut and compatible with high strength and large diameter bolts. DIN6915 10 Hv Heavy Hex Nuts in sizes smaller than 7/16" are double chamfered. DIN6915 10 Hv Heavy Hex Nuts larger than 7/16" are either double chamfered or chamfered on top with a washer faced bearing surface.
  • GB10433 Welding Shear Stud

    GB10433 Welding Shear Stud

    GB10433 Welding Shear Stud refer to the installation of steel pins or grommets, that extend out of the top flange of a steel support beam. Normally the GB10433 Welding Shear Stud are welded, with a spot welder, after the metal deck is installed over the supporting structural steel. The spot welder will burn through the metal deck and attach the GB10433 Welding Shear Stud directly to the top of the steel beam.
  • ISO13918 SD Shear Stud Connectors

    ISO13918 SD Shear Stud Connectors

    ISO13918 SD Shear Stud Connectors are designed to tie the concrete slab with the steel beams and steel deck. This weld studs shear connectors can resist shear forces and increase shear loading capacity in steel buildings. ISO13918 SD Shear Stud Connectors Mainly applied for through steel deck stud welding in composite construction project. All Shear Studs are supplied with ceramic ferrules (ceramic ring). The Ceramic ferrules are made of cordierite and able to withstand heat shock as well as high temperatures without melting or breaking
  • ANSI D-21 Hex Flange Nut

    ANSI D-21 Hex Flange Nut

    ANSI D-21 Hex Flange Nut provide a secure and tight fit, while also preventing the nut from loosening due to vibration. This is especially important in industries where machinery and other heavy equipment are used, as any loosening of fittings can cause dangerous and costly consequences. The flange of ANSI D-21 Hex Flange Nut acts as a washer, providing additional support while preventing the nut from embedding itself into the surface of the material being fastened. This greatly reduces the risk of damage to the structure, as well as providing a more aesthetically pleasing finish.
  • Shear Stud Welding Nelson Stud

    Shear Stud Welding Nelson Stud

    Shear Stud Welding Nelson Stud are used in stud welding to secure steel framed buildings to create a shear connection between the steel and the concrete. We supply and fix all available sizes of Shear Stud Welding Nelson Stud for through deck and straight to steel welding. Shear Stud Welding Nelson Stud are designed to tie the concrete to the steel beams and to resist shear loadings between the concrete slab and steel beam in composite construction.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept